Trade Press/Technical Articles

Bietigheim-Bissingen, February 19, 2010 - As a general contractor Dürr is building the new paint shop at the SGM Dongyue site in Yantai, a joint venture of SAIC and General Motors. The contract...

Bietigheim-Bissingen, Germany, February 23, 2010 – As the general contractor, Dürr is building the paint shop for the new Mercedes-Benz plant in Kecskemét, Hungary. The contract awarded by Daimler is...

Bietigheim-Bissingen, 3. November 2009 – September 24th of this year was a great day for Hyundai: The Czech plant in Nosovice outside Ostrava officially opened with a festive ceremony. In the course...

Bietigheim-Bissingen, Germany, October 7th, 2009 – It was the simplicity of using Dürr's EMOS.Web software that proved so convincing to Eurowater, a leading manufacturer of water treatment systems....

Bietigheim–Bissingen, Germany, August 11th, 2009 – Daimler, Ford and Toyota already have it, and Volkswagen is obtaining it for its factory in Zwickau: the pilot line of the modular FAStplant® final...

Stuttgart, July 6, 2009 – Up to 150,000 vehicles a year will roll off the production line at Volkswagen AG’s new plant at Chattanooga in the US Federal State of Tennessee from 2011. EcoDryScrubber,...

Stuttgart, June 25, 2009 – Energy savings of up to 60% in spray booths and up to 30% in complete paint shops combined with reductions in CO2 and paint particle emissions – these were the facts that...

Stuttgart, May 4 2009 – Dürr, the plant and machinery group, will be

exhibiting at the Mashex machine building industry trade fair to be held at

Moscow. On a joint stand for the well-known and long...

Stuttgart, March 17, 2009 – “Innovations for more sustainability in products and production,” is the motto showcased by Volkswagen AG, from April 20th-24th in Hall 16 at the Hanover Fair. Dürr, as an...

Stuttgart, February 6, 2009 – In February 2009 the eleventh FAStplant® installation will go into operation at VW’s factory at Uitenhage in South Africa. The plant continues the success story of this...

Stuttgart, December 4, 2008 – Dürr’s EMOS.Web software requires just a few clicks to create a uniform user interface and makes it easy to obtain and maintain a complete overview even for complex...

Stuttgart, November 6, 2008 – Best quality, lower energy consumption and lower costs: all of this is achieved with Aquence®, the autophoretic dip coating process that needs no heavy metals whatever...

• First-ever system for regenerative dry overspray separation in automobile production
• Energy savings through reduced air treatment
• Considerable cost per unit and environmental benefits

Stuttgart, April 11, 2008 – Lower costs yet higher quality – this really can be achieved with the EcoEMOS production control tool from Dürr. As a Manufacturing Execution System or MES EcoEMOS links...

Stuttgart, January 28, 2007 – Dürr Factory Assembly Systems (FAS) has received a turnkey contract from Dongfeng Peugeot Citroen Automobile Company Ltd. (DPCA) for a new assembly line. For this...

Stuttgart, November 27, 2007 – Airbus manufactures vertical tail planes for all of its aircraft families at its Stade site in Germany. Dürr Aircraft Assembly Systems (AAS) received the contract to...

• EcoBell 2 atomizer technology cuts materials consumption
• New family of Dürr robots for interior painting extended
• Product initiative in sealing technology
• Expanded use of 3D visualization

Püttlingen, August 2, 2007 – Regular calibration is required for measuring equipment of all kinds. This also applies, of course, to the roller test beds used in the automotive industry. To meet this...

Stuttgart, July 12, 2007 – In 2008 new legislation comes into effect relating to accidents involving hazardous materials. In order to ensure proper compliance Airbus, assisted by Dürr and Stohrer, is...

Stuttgart, July 5 2007 – They were first installed in the spring of 2004 – in a building used for R&D trials situated close to the DaimlerChrysler factory at Sindelfingen. “They” were FAStplant®...

Stuttgart, June 5, 2007 – The Dürr Group is benefiting from auto industry growth in Eastern Europe. The mechanical and plant engineering firm received two large orders from that region in recent...

Stuttgart, May 24, 2007 - On their 6th "Open House" from September 21, Dürr Systems GmbH will introduce innovative technologies for the painting of bodies and epoxy add-on pieces. The presentation of...

Stuttgart, April 12, 2007 – BMW has opted for FAStplant® the modular final assembly concept from Dürr Factory Assembly Systems (FAS) for its new production facility at Chennai. Assembly of BMW 3...

Püttlingen, March 20, 2007 – Dürr Factory Assembly Systems (FAS) is to supply a new test line for all models produced by Ferrari at Maranello, Italy. As from May of this year Dürr technology will...

Stuttgart, March 6, 2007 – Dürr has carried out further development on its successful RoDip rotational painting system. In addition to features such as a drive system on one side only, the new...