Press

Trade Press 2013

Date Title
11/21/2013 Everything Flows

Published by Airbus One Magazine - September issue – The first stage of production for the future equipment assembly production line of the single aisle vertical tail, known as newFlowline, is...Read more

11/14/2013 Award from Fiat for Dürr’s Italian subsidiary CPM S.p.A.

Bietigheim-Bissingen – At the convention “Supplier Qualitas 2013” at the auditorium of Lingotto in Torino the Fiat Chrysler Group awarded CPM S.p.A., an Italian subsidiary of Dürr, as “Capital...Read more

10/25/2013 EcoCCore: the new generation of solvent-based part cleaning systems. Optimized cleaning quality reduced cost, high flexibility.

With its EcoCCore system now superseding the previous 81C/P equipment series, Dürr Ecoclean is setting new standards in solvent-based part cleaning. This is due, on the one hand, to a one-third...Read more

10/08/2013 EMO 2013

At the world’s largest exhibition for metalworking, EMO in Hannover, Schenck RoTec presented to the international public a mix of highly interesting new products specific to the Tool balancing...Read more

10/08/2013 Ultrasonic fine cleaning for parts of over 65 materials – Maximum cleanliness for high-end sensor units

In a bid to further improve manufacturing performance, a leading producer of high-end measuring technology has adopted an all-new part cleaning concept. It comprises two ultrasound-based ultra-fine...Read more

10/07/2013 From One and a Half Hours to Fifteen Minutes

Published by Airbus One Magazine - May issue – So-called “Wing Trolleys” are used for wing equipping work at Airbus Bremen site since January 2, 2013. Unlike the previous transport frames and...Read more

09/30/2013 Dürr opens new mechanical engineering site in Shanghai

Darmstadt/Shanghai, September 30, 2013 – The Dürr Group commissioned its new mechanical engineering site in Shanghai at the end of September. After the final expansion phase, this modern industrial...Read more

09/24/2013 EcoEMOS – Production Intelligence

Bietigheim-Bissingen Germany, September 20th, 2013 – A detailed overview on production lines and the resulting analysis of optimization potentials is the prerequisite for any increases in efficiency....Read more

09/24/2013 EcoEMOS – Production Intelligence

Bietigheim-Bissingen Germany, September 20th, 2013 – A detailed overview on production lines and the resulting analysis of optimization potentials is the prerequisite for any increases in efficiency....Read more

08/30/2013 Dürr Ecoclean unveils a new system concept for solvent cleaning

Discover what it is all about, at parts2clean, 22-24 October 2013, Stuttgart, Hall 4, Stand 4216/4315Read more

07/18/2013 EcoCAgile tailored to the requirements of the Asian market - Flexible, low-cost and space-saving robotized cleaning system

Monschau/Shanghai 18th of July 2013 - Take a close look at customer needs in China and India and develop a customized cleaning solution – the result is Dürr Ecoclean’s new EcoCAgile. The low-cost,...Read more

07/18/2013 Dürr upgrades world’s largest test center for painting technology / Space for robot assembly significantly extended

Bietigheim-Bissingen, July 18, 2013 – Dürr is spending almost € 10 m euros on further expanding its headquarters because of the positive growth prospects: the world’s largest test center for painting...Read more

06/21/2013 Award from Peugeot for Dürr’s EcoDryScrubber

Guyancourt, 20 June 2013 – Energy savings of up to 60% in the paint booth combined with lower CO2 emissions and fewer paint particle emissions – these facts convinced the Peugeot jury. Therefore...Read more

06/13/2013 Dürr Eco+Paintshop for SGM in Shanghai

Bietigheim-Bissingen, June 5th, 2013 - Dürr is building a new Eco+Paintshop for Shanghai General Motors with reduced energy consumption and lower emissions. The paint shop has a throughput of 20...Read more

05/31/2013 Dürr Ecoclean opens new Technology Center in Pune

Pune, 31st of May 2013 - Parts cleaning technology leader Dürr Ecoclean has inaugurated its new Technology Centre in Pune at the end of May. The 6,000 square feet facility is equipped with the latest...Read more

05/15/2013 The Schenck RoTec Test Laboratory certifies balancing systems and working standards

Without accurate measuring devices, no Quality Management rests on a stable basis, and this is also valid for the machines and working standards used in balancing technology. But does a reference...Read more

05/08/2013 Dürr extends Eco+Paintshop at BMW Brilliance in Shenyang

Bietigheim-Bissingen, May 7th, 2013 – The world’s most environmentally friendly automotive paint shop: that was the requirement of BMW Brilliance when placing the order with Dürr in 2011 for the...Read more

04/08/2013 Dürr Ecoclean strengthens sales and service capabilities for Czechia and Slovakia

Optimized customer support based on a direct presence Filderstadt, April 8, 2013 – As of 1 March 2013, Dürr Ecoclean has bundled all its sales and service functions for the Czech and Slovak...Read more

03/12/2013 Dürr builds two paint shops in China for Changan Ford

Bietigheim-Bissingen Germany, March 12th, 2013 – Dürr is the general contractor in implementing two paint shops, each with two top coat lines, for Changan Ford Automotive in China. This will expand...Read more

03/12/2013 Boosting efficiency in engine production - Drive down cleaning costs by more than two-thirds

Monschau, 12th of March 2013 - On advanced automotive engine and transmission building lines, parts cleaning systems have the highest specific energy demand of all equipment involved – reason enough...Read more

03/12/2013 Boosting efficiency in engine production - Drive down cleaning costs by more than two-thirds

Filderstadt, 12th of March 2013 - On advanced automotive engine and transmission building lines, parts cleaning systems have the highest specific energy demand of all equipment involved – reason...Read more

03/01/2013 High requirements for adhesive systems in body shell construction

Gluing has gained an increasingly important role in the body shop. Alongside sealing and insulating, it is used especially for the assembly of body parts. Innovative lightweight designs with a mix of...Read more

02/07/2013 Dürr Ecoclean Announces Local Authorized Service for USA Pump Rebuilds

Wixom, MI, February 2013 – Parts cleaning technology leader Dürr Ecoclean announces its pump rebuild service. Rebuilt pumps cost less than brand new pumps. With Dürr’s pump rebuild service, customers...Read more

02/01/2013 Dürr Ecoclean goes DIRECT - New business structure is a first for UK and Ireland

Warwick, 13/02/01 As from 1st February 2013 the new business unit of Dürr Ecoclean UK and Ireland will operate from the Dürr Ltd offices located in Warwick England for all Dürr Ecoclean Sales and...Read more