Press

Glossary

Simply choose a section to access the glossary you need:

» Finance
» Technology
QuickLinks

New high-temperature ORC system from Dürr Cyplan increases the efficiency of decentralized electricity generation

05/18/2018

Bietigheim-Bissingen, 18 May 2018 – Dürr Cyplan will be presenting its current ORC technology in the power range from 50 to 1,000 kWel at Electrify Europe in Vienna from 19 to 21 June 2018.This will also include the newly developed Cyplan® ORC 250 HT. It can be transported as a fully functioning high-temperature ORC system in a standard container. The compact module increases the electrical output of decentralized electricity generation units, for example by up to 8 per cent for engines and up to 30 percent for gas turbines. This increases the efficiency and profitability of electricity generation. The ORC system makes a profit right from the first year and the investment pays for itself within a short space of time.

The Organic Rankine Cycle (ORC) is a thermodynamic process that converts the energy in exhaust heat into electricity. Dürr Cyplan offers a wide range of highly efficient ORC systems and is constantly developing the technology. The latest development is the Cyplan® ORC 250 HT. The system has been specially developed for combination with decentralized electricity generation units based on combustion engines. It incorporates the specific requirements and experiences of the biggest providers for decentralized power generation. It focuses on using waste heat from exhaust gas in the high-temperature range (400 °C to 530 °C) of diesel and gas engines in order to increase their operating efficiency. Further customer requirements included easy transport in a 40-foot shipping container as well as a modular structure. The ORC system can thus be integrated into existing systems quickly and cost effectively – with engines of different sizes and from different manufacturers.

Photo 1: Combination of a decentralized power plant with a Dürr Cyplan® ORC module

Its design makes the Cyplan® ORC 250 HT suitable for a wide range of applications, for example in mining, shipping, disposal and utility companies, the oil and gas industry, or in remote settlement areas. The thermal energy produced in the electricity generation plants powered by diesel or gas engines has hardly been used until now, even though it accounts for around 60 percent of the primary energy input. The Cyplan® ORC 250 HT puts this heat to good use.

The resulting improvement in efficiency can either be used to increase output while keeping diesel or gas consumption constant or to reduce diesel or gas consumption while keeping output constant. Estimating the generated electricity at €0.15/kWh and an annual utilization of 8,000 hours, the Cyplan® ORC 250 HT generates an additional approx. €300,000 annually.

Photo 2: Cumulative result of a Dürr Cyplan® ORC 250 HT module (before interest, taxes, and depreciation)

Depending on the different costs of electricity generation worldwide, the system pays for itself within two to four years. Considering electricity generation plants’ long service life of ten to 15 years, this is an investment that is always worthwhile. In addition, the use or retrofitting of ORC systems as an efficiency-increasing measure is promoted in many countries.

 

Photo 3: Cyplan® ORC – maximum efficiency in the performance class

Over the past six years, Dürr Cyplan has successfully planned, connected, and commissioned Cyplan® ORC systems for different waste heat sources in the biogas, natural gas, biomass, geothermal and solar sector as well as in industry in different countries around the world.
Dürr Cyplan, a subsidiary of the Dürr Group, can be found at booth A-G16 in hall A at Electrify Europe 2018.

The Dürr Group is one of the world's leading mechanical and plant engineering firms with extensive expertise in automation and digitization/Industry 4.0. Products, systems and services offered by the Group enable highly efficient manufacturing processes in different industries. Dürr supplies sectors like the automotive industry, mechanical engineering, chemical, pharmaceutical and woodworking industries. The company has 92 business locations in 31 countries. The Group generated sales of € 3.71 billion in 2017. Dürr has around 15,000 employees and operates in the market with five divisions:
• Paint and Final Assembly Systems: paint shops and final assembly systems for the automotive industry
• Application Technology: robot technologies for the automated application of paint, sealants and adhesives
• Clean Technology Systems: exhaust-air purification systems and energy efficiency technology
• Measuring and Process Systems: balancing equipment as well as assembly, testing and filling technology
• Woodworking Machinery and Systems: machinery and equipment for the woodworking industry

Contact:
Dürr Cyplan Ltd.
Joachim-Uwe Lorenzen
Director
Phone +49 7142 78-4374
Mobile +49 16 28 55 30 25
E-mail Joachim.Lorenzen(at)durr-cyplan.com
 


 

Dürr News