Dürr는 이 웹사이트에서 쿠키 또는 유사한 기술(이하 “쿠키”)을 사용합니다. Dürr가 웹사이트 이용 방식을 분석하고 기능 개선하는 데 앱을 사용하도록 허용하려면 “동의”를 클릭하십시오. Dürr가 사용하거나, 설정을 변경하거나, 상세 정보를 확인하도록 허용할 특정 쿠키를 선택하려면 “상세 정보”를 클릭하십시오.

상세 정보

거부

동의

다음에서는 이 웹사이트에서 사용되는 개별 기술을 활성화하거나 비활성화할 수 있습니다.
전체 동의
필수

이러한 쿠키는 페이지 검색, 언어 설정 및 보호 영역 액세스 등과 같은 기본 기능을 제공하여 웹사이트를 사용하기 편리하게 합니다. 이 쿠키가 없으면 웹사이트가 정상적으로 작동하지 않습니다. 따라서 이러한 유형의 쿠키를 옵트 아웃하면 안 됩니다.

기능

이러한 쿠키를 통해 Dürr는 사용자의 설정, 선택 및 필터 설정 등을 저장하여 Dürr 웹사이트의 기능을 개선하고 사용자가 더 많은 관심을 갖도록 콘텐츠를 향상시켜 사용자 경험을 개선할 뿐 아니라 다음 방문 시 사용자의 장치를 인식할 수 있습니다.

분석

이러한 쿠키는 Dürr와 서비스 제공업체(예: 구글의 Google Analytics 서비스)가 Dürr 웹사이트에서의 사용자 활동 관련 정보와 통계를 수집하고 분석하여 그 결과를 바탕으로 Dürr의 웹사이트를 최적화할 수 있도록 합니다.

The Dürr Group grows through production technology for electric vehicles

Bietigheim-Bissingen, February 27, 2020 – The automotive industry is investing large sums in electromobility. In doing so, it is focusing not only on developing battery-powered cars but also on equipping its plants with modern production technology. This provides an opportunity for the Dürr Group: In 2019, incoming orders relating to e-mobility production technology increased by 44% to € 390 million. Aside from well-established OEMs, customers also include many new manufacturers of battery vehicles.

In 2030, around 60% of all new cars will have an alternative drive system. This amounts to a good 70 million cars, compared to 14 million in 2020. The majority of them will be powered by electricity. E-mobility is on the cusp of strong growth, in which the Dürr Group will participate as a technology partner.

Thanks to electromobility, the customer base of the mechanical and plant engineering firm is expanding. New carmakers are emerging, particularly in China and the United States, who have no experience of producing conventional cars but are keen to gain market share with battery-powered vehicles. In 2019, over 20 such e-pioneers ordered production technology from Dürr. In order to mass-produce their cars, they first need the necessary factories. “With our experience, we are the right partner for them. We offer a broad technology range and can provide comprehensive advice to e-mobility players in building their production base”, says Ralf W. Dieter, CEO of Dürr AG.

China is the largest market for electric cars. This year, Dürr has already received a large order there for the construction of a paint shop for battery cars. Demand has also picked up in other regions. In the United States, Dürr received three large paint systems orders from e-mobility manufacturers in the second half of 2019.

Whether the customer is an EV startup or an established automotive group – what is important in most cases is that the paint shop be scalable. This means that, in the initial stage, customers often order paint systems for smaller unit numbers. However, the plant must be expandable by modules, thus enabling customers to install additional capacity quickly when sales figures increase. “Scalability is an important pacemaker in our innovation management. We develop specific products and systems to ensure that customers’ production capacity can grow in line with the market success of their products”, says Dr. Jochen Weyrauch, who is responsible for paint systems business on the Dürr AG Board of Management.

Broad range for the final assembly of battery cars
In addition to paint systems, the Dürr Group also offers other technologies for the production of electric vehicles – in final assembly, for instance. Since electric vehicles have a less complex power train than their conventional counterparts, their assembly allows for a higher level of automation. Dürr has already installed automated assembly systems for renowned manufacturers of battery cars. Demand is likely to grow as unit numbers in electric vehicle production increase.

One important stage in the assembly of electrically powered vehicles is the ‘marriage’ stage. This is where the battery is fixed to the underbody using Dürr technology – computer-controlled and with up to 36 bolts, which are delivered to the bolt holes fully automatically. The Group also offers systems for filling batteries with refrigerants. This ensures that the batteries do not get too warm and can achieve their maximum range. Dürr’s filling technology is used, e.g., for the StreetScooter, the electric delivery van used by Deutsche Post.

Testing technology for fully assembled cars is also facing new challenges due to the advent of electromobility, especially when it comes to safety. Dürr’s test systems are used to ensure that the high-voltage circuits in battery-powered vehicles do not pose any risks.

Electric motors run quietly thanks to technology by Schenck RoTec
The production of electric motors is supported by Dürr’s subsidiary Schenck RoTec through, for instance, the eTeno balancing system; this measures and corrects unbalance in electric armatures for e-drives. In addition, Schenck RoTec offers the Centrio spin test system for material testing on electric motors. This enables carmakers to determine the maximum rotation loads their motors can be exposed to.

Technology for battery production
To achieve greater unit numbers in electromobility, the automotive industry requires additional capacity for battery production. Here, too, the Dürr Group offers technology for various stages of manufacture. Its subsidiary, Megtec, offers a system for coating lithium-ion battery electrodes. This process is unique, since it applies the cathode and anode material onto the basic material – a metal foil – simultaneously on both sides.

Dürr supports the manufacture of battery modules through highly precise application technology. Among its products is a coating system for the thermal and electrical insulation of battery cells (insulation can painting). There is also a solution ‘made by Dürr’ for battery glueing. This is where the coated battery cells are arranged next to each other and bonded into a battery module. After that, a thermal interface material (gap filler) is applied. This conducts away the heat generated during battery charging and discharging. Finally, the battery cover is glued into place.

Dürr’s subsidiary Schenck RoTec offers the Centrio spin test system for material testing on electric motors. This enables carmakers to determine the maximum rotation loads their motors can be exposed to.

Paint application is one of the most demanding tasks in the automobile production.

The systems of Dürr subsidiary Megtec are used in an early phase of battery production; they coat electrodes for lithium-ion batteries.