당사에서는 쿠키, 쿠키와 유사한 기술 및 트래킹 서비스를 이용하고 있습니다.

이 웹사이트에서 당사는 쿠키, 쿠키와 유사한 기술 및 트래킹 서비스를 이용하고 있습니다(이하 “쿠키”). 이 쿠키는 웹사이트를 기술적으로 구현하는 목적으로 사용하는 데 그치지 않으며 당사의 웹사이트를 여러분의 사용 특성을 바탕으로 개선하고(예: Salesforce Pardot) 여러분의 관심사에 적합한 콘텐츠를 제공하는데 사용됩니다(예: LinkedIn Insights, Google Ads). 그리고 이러한 목적을 위해 여러분의 동의가 필요합니다. 또한 당사는 제삼자 제공업체의 콘텐츠 역시 포함하여 제공합니다(예: 통합 인증을 위한 Microsoft Azure). 단, 이 과정에서 여러분의 개인정보가 안전하지 않은 제삼국인 미국으로 전송될 수 있습니다. “전체 동의”에 클릭하실 경우 꼭 필요하지 않은 쿠키 사용에 동의할 뿐만 아니라 제삼국으로의 데이터 전송에도 동의하게 됩니다. “거부”에 클릭하면 꼭 필요하지 않은 쿠키 사용에 거부하게 됩니다. 또는 “상세 정보”에서 당사에서 사용할 수 있는 개별 쿠키를 선택할 수 있습니다. 여러분의 해당 권리 등에 대한 자세한 정보는 “상세 정보” 또는 당사 개인정보 취급 정책 에서 확인하실 수 있습니다. .

상세 정보

거부

동의

다음에서는 이 웹사이트에서 사용되는 개별 기술을 활성화하거나 비활성화할 수 있습니다.

전체 동의

필수

이 쿠키는 페이지 검색, 언어 설정, 선호하는 쿠키 및 웹사이트 보호 영역 액세스 등과 같은 기본 기능을 제공하여 웹사이트를 이용할 수 있도록 합니다. 또한 이 카테고리의 쿠키는 웹사이트가 관련 법 규정과 보안 기준의 요건을 충족하도록 합니다. 이러한 이유로 당사 웹사이트 방문 시 이 쿠키에 대해 반드시 동의해야 합니다. 이 쿠키에 대한 상세 정보는 “자세한 정보”에서 확인할 수 있습니다.

기능성 및 개인 설정

이 쿠키는 여러분이 당사 웹사이트를 방문할 때의 특성에 대한 정보를 수집하여 당사 웹사이트의 기능성과 호감도를 여러분의 지난 방문 내역, 여러분의 현재 위치 및 브라우저 설정에 맞게 변경하여 여러분의 사용자 경험을 개선하는 데 사용합니다. 또한 이 쿠키는 당사의 웹사이트에 통합된 제삼자 제공업체의 툴에 여러분이 접근할 수 있도록 해줍니다(예: 통합 인증을 위한 Microsoft Azure). 이 과정에서 여러분의 개인정보가 안전하지 않은 제삼국인 미국으로 전송될 수 있습니다. 이 쿠키에 동의하지 않으실 경우, 웹사이트의 기능을 제한적으로만 사용하실 수 있습니다. 사용된 툴에 대한 상세 정보는 “자세한 정보”에서 확인할 수 있습니다.

분석

이 쿠키는 당사 웹사이트 이용 정보를 바탕으로 기본 이용 및 사용자 통계 작성에 사용됩니다. 이 쿠키 사용에 동의하실 경우 쿠키 설정 외에 개인정보 처리 및 Salesforce Pardot 등과 같이 사용한 서비스를 통해 미국으로 개인정보가 전송되는 것에 동의하는 것으로 간주합니다. 사용된 툴에 대한 상세 정보는 “자세한 정보”에서 확인할 수 있습니다.

마케팅 및 소셜미디어

이 쿠키는 제삼자 제공업체가 당사 웹사이트의 콘텐츠를 소셜미디어를 통해 어떻게 공유하는지에 대한 정보를 수집할 수 있도록 해주거나, 여러분이 소셜미디어 플랫폼 또는 소셜미디어 캠페인 및 당사 자체 웹사이트(예: LinkedIn Insights) 사이에서 이동할 경우 이러한 이용 특성에 대한 분석 데이터를 전달합니다. 또한 제삼자 제공업체의 마케팅 쿠키는 다른 웹사이트에 게시되는 당사 광고의 효과를 측정할 수 있도록 해줍니다(예: Google Ads). 당사는 이 쿠키를 사용하여 여러분에게 당사 콘텐츠가 전달되는 방식을 최적화합니다. 사용된 제삼자 제공업체 및 소셜미디어 플랫폼에서는 여러분의 개인정보를 안전하지 않은 제삼국인 미국으로 전송할 수 있습니다. 이 쿠키 사용에 동의하실 경우 쿠키 설정 외에 개인정보 처리 및 위에 설명된 바와 같이 개인정보가 전송되는 것에 동의하는 것으로 간주합니다. 사용된 툴과 당사 소셜미디어 활동 등에 대한 상세 정보는 “자세한 정보”에서 확인할 수 있습니다.

자세한 정보

설정 저장

Modular MOM system bundles all functional areas of the digital factory

Dürr presents a complete, single source solution for production planning and control at the Hannover Messe trade fair

Bietigheim-Bissingen, 06 March 2023 – To make a smart factory a reality, machines and systems from all sub-areas must communicate with each other and end-to-end digitalization must be achieved. The Dürr Group uses its manufacturing and digitalization knowledge to combine hardware and software. Together, Dürr's software specialists and the Group subsidiary iTAC developed a modular solution for manufacturing planning, execution, control, monitoring, optimization, and predictive analysis. Instead of monolithic individual solutions, the new Manufacturing Operations Management (MOM) system relies on microservices that provide functionality as required. The solution enables a high level of flexibility and consistency and offers many interfaces in terms of interoperability. The two companies will display how this works at the Hannover Messe trade fair in Hanover, Germany, from April 17th to 21st, 2023, in hall 15, booth E34.

There are three central superordinate control components in every digital factory: MES (Manufacturing Execution System) controls and monitors production, SCADA (Supervisory Control and Data Acquisition) collects and analyzes data, and HMI (Human Machine Interface) visualizes production and process flow. Until now, these components, for example, the MES sub-segment, were mostly designed as stand-alone solutions.

Dürr and iTAC have combined their competencies and merged the functional scopes of MES, SCADA, and HMI into a uniform MOM architecture. This was made possible by combining Dürr's DXQcontrol product family with iTAC's iTAC.MOM.Suite. Manufacturing companies, whether manufacturers or suppliers, thus receive a future-proof industrial digitalization solution with interoperable modules that cover all smart factory functionalities.

Microservices architecture for agile manufacturing

While previous MES solutions are monolithically structured, i.e., a single software product encompasses different functionalities, such as data acquisition or logistics, Dürr and iTAC’s MOM architecture takes a modular approach. Multiple microservices act and communicate with each other while performing their tasks independently. Unlike monolithic solutions, microservices have self-sufficient data storage and open interfaces for communication with other services for flexible deployment. Only necessary modules are installed, making operation more sustainable, as fewer servers are required. The MOM architecture’s modular structure is also less error-prone than monolithic architectures, increasing plant availability.

Variable availability: Cloud, on-site, or hybrid

Another advantage of microservices is they can be flexibly installed on IIoT platforms in the cloud, on-site (on-premises), or in hybrid factory deployments. Customers can use specific cloud services while rolling out other functionalities on-site if there are operating costs or production stability concerns, for example. The hybrid solution is particularly advantageous for large data volumes in the terabyte range. Processing some of the data locally ("on-edge"), i.e., within the local environment, saves time, costs, and energy because not all data sets have to be transferred to the cloud/IIoT platform via many transactions. In addition, local processing brings the necessary speed to control manufacturing processes in real-time.

Sustainable Production Management

Dürr and its subsidiaries iTAC Software AG and Dualis GmbH IT Solution will present other industry development trends in addition to the MOM presentation at the Hannover Messe trade fair. Another focus is on sustainable and energy efficient production management. Dürr will present its ISO 50001-certified DXQenergy.management software that maps media consumptions throughout the production line, systematically detects consumption anomalies, and consequently identifies potential savings. The GANTTPLAN planning tool from DUALIS monitors energy costs incurred during production planning.

Manufacturing Analytics and Intelligence

Dürr and iTAC’s analysis tools are all about using artificial intelligence to improve production quality and availability. They can act as MOM system components. The products evaluate production and quality data, which can detect possible defects or impending wear but also use machine learning to make forecasts. Prevention and prediction services and the integration of edge technologies result in optimization, increased added value, and data sovereignty.

Advanced Planning and Scheduling (APS)

The Group offers intelligent tools from Dürr, iTAC, and DUALIS as an overall solution for the APS field. These tools plan and optimize production order execution, consider available resources and capacities as well as material requirements and necessary maintenance intervals. The solution has many benefits, such as short delivery times, high delivery reliability, and permanent cost optimization.

Joint trade fair appearance of Dürr, iTAC, and DUALIS

More than 4,000 exhibitors will present their solutions on current trends at the major industrial trade fair in Hanover, Germany, where the digitalization of production plays a central role. Dürr, iTAC, and DUALIS will present end-to-end solutions for a smart factory at their joint booth (hall 15, booth E34) in line with the theme "Real industrial transformation. Digitize today. Enable tomorrow."

  • The Dürr Group will present end-to-end solutions for a smart factory at Hannover Messe 2023.

  • The modular microservice architecture of the new MOM release offers a variety of applications across the entire production. Here based on the example of the Material Flow Track.