당사에서는 쿠키, 쿠키와 유사한 기술 및 트래킹 서비스를 이용하고 있습니다.

이 웹사이트에서 당사는 쿠키, 쿠키와 유사한 기술 및 트래킹 서비스를 이용하고 있습니다(이하 “쿠키”). 당사에게는 당사의 웹사이트를 기술적으로 표시하는 데 사용될 뿐만 아니라 당사의 웹사이트를 되도록 잘 사용할 수 있도록 하고 여러분의 사용 특성을 바탕으로 이를 개선하는 데 사용되거나 또는 여러분의 관심사에 맞추어 컨텐츠와 마케팅을 제공하는 데 사용되는 이러한 쿠키에 대해 여러분의 동의가 필요합니다. 이러한 목적을 달성하기 위해 당사는 제삼의 제공자(예를 들어 Salesforce, LinkedIn, Google, Microsoft, Piwik PRO)와 협력합니다. 또한 여러분은 이러한 제공자를 통해 타사의 웹사이트에서도 광고를 수신하실 수 있습니다.
동의할 경우, 여러분의 개인정보에 대한 모든 후속 처리(프로필에 있는 여러분의 IP 주소 저장)에 대해 동의하고 당사의 파트너가 여러분의 개인정보를 미국으로, 그리고 경우에 따라 다른 국가에 전송하는 것에 동의하는 것으로 간주됩니다. 이렇게 정보가 전송될 경우 관할 당국이 해당 정보에 액세스하고 여러분의 권리가 행사되지 않을 위험이 있습니다. “설정”에서 당사가 사용할 수 있는 쿠키를 선택하십시오. 더 자세한 정보, 특히 동의의 철회와 같은 여러분의 권리는 당사 개인정보 보호정책에 수록되어 있습니다 .

설정

기술적으로 필요한 쿠키만

동의 수락

다음에서는 이 웹사이트에서 사용되는 개별 기술을 활성화하거나 비활성화할 수 있습니다.

전체 동의

필수

이 쿠키는 페이지 검색, 언어 설정, 선호하는 쿠키 및 웹사이트 보호 영역 액세스 등과 같은 기본 기능을 제공하여 웹사이트를 이용할 수 있도록 합니다. 또한 이 카테고리의 쿠키는 웹사이트가 관련 법 규정과 보안 기준의 요건을 충족하도록 합니다. 이러한 이유로 당사 웹사이트 방문 시 이 쿠키에 대해 반드시 동의해야 합니다. 이 쿠키에 대한 상세 정보는 “자세한 정보”에서 확인할 수 있습니다.

기능성 및 개인 설정

이 쿠키는 여러분이 당사 웹사이트를 방문할 때의 특성에 대한 정보를 수집하여 당사 웹사이트의 기능성과 호감도를 여러분의 지난 방문 내역, 여러분의 현재 위치 및 브라우저 설정에 맞게 변경하여 여러분의 사용자 경험을 개선하는 데 사용합니다. 또한 이 쿠키는 당사의 웹사이트에 통합된 제삼자 제공업체의 툴에 여러분이 접근할 수 있도록 해줍니다(예: 통합 인증을 위한 Microsoft Azure). 이 과정에서 여러분의 개인정보가 안전하지 않은 제삼국인 미국으로 전송될 수 있습니다(여기에 내재된 위험에 대한 정보에 관해서는 당사의 개인정보 보호정책 1.5절 참조). 이 쿠키에 동의하지 않으실 경우, 웹사이트의 기능을 제한적으로만 사용하실 수 있습니다. 사용된 툴에 대한 상세 정보는 “자세한 정보”에서 확인할 수 있습니다.

분석

이 쿠키는 제삼자 제공업체가 당사 웹사이트의 콘텐츠를 소셜미디어를 통해 어떻게 공유하는지에 대한 정보를 수집할 수 있도록 해주거나, 여러분이 소셜미디어 플랫폼 또는 소셜미디어 캠페인 및 당사 자체 웹사이트(예: LinkedIn Insights) 사이에서 이동할 경우 이러한 이용 특성에 대한 분석 데이터를 전달합니다. 또한 제삼자 제공업체의 마케팅 쿠키는 다른 웹사이트에 게시되는 당사 광고의 효과를 측정할 수 있도록 해줍니다(예: Google Ads, Microsoft Advertising). 당사는 이 쿠키를 사용하여 여러분에게 당사 콘텐츠가 전달되는 방식을 최적화합니다. 사용된 제삼자 제공업체 및 소셜미디어 플랫폼에서는 여러분의 개인정보를 안전하지 않은 제삼국인 미국으로 전송할 수 있습니다(여기에 내재된 위험에 대한 정보에 관해서는 당사의 개인정보 보호정책 1.5절 참조). 이 쿠키 사용에 동의하실 경우 쿠키 설정 외에 개인정보 처리 및 위에 설명된 바와 같이 개인정보가 전송되는 것에 동의하는 것으로 간주합니다. 사용된 툴과 당사 소셜미디어 활동 등에 대한 상세 정보는 “자세한 정보”에서 확인할 수 있습니다.

마케팅 및 소셜미디어

이 쿠키는 제삼자 제공업체가 당사 웹사이트의 콘텐츠를 소셜미디어를 통해 어떻게 공유하는지에 대한 정보를 수집할 수 있도록 해주거나, 여러분이 소셜미디어 플랫폼 또는 소셜미디어 캠페인 및 당사 자체 웹사이트(예: LinkedIn Insights) 사이에서 이동할 경우 이러한 이용 특성에 대한 분석 데이터를 전달합니다. 또한 제삼자 제공업체의 마케팅 쿠키는 다른 웹사이트에 게시되는 당사 광고의 효과를 측정할 수 있도록 해줍니다(예: Google Ads, Microsoft Advertising). 당사는 이 쿠키를 사용하여 여러분에게 당사 콘텐츠가 전달되는 방식을 최적화합니다. 사용된 제삼자 제공업체 및 소셜미디어 플랫폼에서는 여러분의 개인정보를 안전하지 않은 제삼국인 미국으로 전송할 수 있습니다(여기에 내재된 위험에 대한 정보에 관해서는 당사의 개인정보 보호정책 1.5절 참조). 이 쿠키 사용에 동의하실 경우 쿠키 설정 외에 개인정보 처리 및 위에 설명된 바와 같이 개인정보가 전송되는 것에 동의하는 것으로 간주합니다. 사용된 툴과 당사 소셜미디어 활동 등에 대한 상세 정보는 “자세한 정보”에서 확인할 수 있습니다.

자세한 정보

설정 저장

Dürr 그룹의 언론배포용 사진과 동영상

Dürr 그룹의 언론배포용 사진과 동영상 이용 조건

모든 사진은 저작권법에 따라 보호됩니다. 전체 이용권한은 Dürr AG에 귀속됩니다.

사진은 변경되지 않은 상태로 보도용으로만 사용할 수 있으며, 상업적 목적, 예를 들어 광고/마케팅 또는 매매 용도로 사용해서는 안 됩니다. 공개 시 항상 “출처 Dürr”를 밝혀야 합니다.

당사 사진을 이용하기 전 다음 주소로 반드시 알려주시기 바랍니다: 주소. 보도 이외의 목적으로 사용하거나 당사 사진을 변경하고자 할 경우 사전에 당사의 동의를 얻어야 합니다.

다운로드

도장 시스템

EcoDC MACS
ECODC MACS creates a voltage profile that moves with the car body.

EcoDry X – Simple and robust paint overspray separation with disposable cardboard filters — EcoDry X
EcoDry X – Simple and robust paint overspray separation with disposable cardboard filters

EcoInCure by Dürr stands for innovative car body curing from the inside — EcoInCure
Innovative car body curing from the inside

EcoProBooth — EcoProBooth
Service cubicles are located in each corner of the EcoProBooth. These can be approached by the robots. The non-active robots can be cleaned or serviced in the cubicles.

Dürr EcoProfleet in motion — EcoProFleet
EcoProFleet – Automated Guided Vehicle for paint shops

EcoReflect — EcoReflect
Innovative light tunnel for checking surface quality.

Modular work decks from Dürr are the ergonomic and flexible solution — Modular work decks
Modular work decks from Dürr are the ergonomic and flexible solution for manual work in the paint shop. Thanks to the modular system, they can be adapted quickly and easily.

Dürr's EcoReflect light tunnel for checking surface quality. — EcoReflect
Dürr's EcoReflect is a innovative light tunnel for checking surface quality.

RoDip® E — RoDip® E
RoDip® E – Electrically driven rotational dip coating

Dürr's Pretreatment and Electrocoating — Ecopaint WetSystem
Ecopaint WetSystems successfully unites all components and modules for a perfect corrosion protection of the car body. For many years The rotational dip-coating system RoDip® stands for the perfect interplay between plant and conveyor.

자동차 산업을위한 응용 기술

7 Axes – Total freedom of movement — 7 Axes – Total freedom of movement
Thanks to its seven axis kinematic system, the EcoRP E043i robot reaches every spot in the car body. This can eliminate the need for a linear displacement rail and significantly reduce investment and maintenance costs in the paint booth.

[Translate to Korean:] 7-axis robots EcoRP E043i — The new generation of 7-axis robots EcoRP E043i

[Translate to Korean:] 7-axis robots EcoRP E043i — The new generation of 7-axis robots EcoRP E043i

[Translate to Korean:] EcoPaintJet paint application without any overspray — EcoPaintJet – Overspray-free paint application
EcoPaintJet is an innovative system for automated, highly defined paint application without any overspray.

EcoPaintJet – Overspray-free paint application — EcoPaintJet – Overspray-free paint application
EcoPaintJet is an innovative system for automated, highly defined paint application without any overspray.

EcoPaintJet – Overspray-free paint application — EcoPaintJet – Overspray-free paint application
EcoPaintJet is an innovative system for automated, highly defined paint application without any overspray.

[Translate to Korean:] EcoRS 30L16S robot suitable for sealing applications inside car bodies — EcoRS 30L16S
Thanks to its shortened arm 1, the robot EcoRS 30L16S is particularly suitable for sealing applications inside car bodies.

EcoShot Meter Double — EcoShot Meter Double
The electric EcoShot Meter piston dosing unit is suitable for most viscous sealing and gluing materials. The precise system is available in two sizes and covers almost all applications as a standard model.

[Translate to Korean:] duerr gluing technology body in white — Gluing body in white

[Translate to Korean:] Side window installation and gluing at VW Zwickau — Side window installation
Side window installation and gluing at VW Zwickau

Color changer EcoLCC2 — Color changer EcoLCC2
The color changer EcoLCC2 provides up to 36 colors flexibly for painting. Each color is activated by docking into the respective paint valve. The color change is done quickly, and paint losses remain minimal with just 10-15 ml per color change.

Gluing in body in white: flatstream application — Gluing in body in white: flatstream application
Flatstream application is used for insulation in the automotive sector. The nozzle is adjustable in width to suit the respective application task.

EcoBell3 — EcoBell3
The EcoBell3 high-speed rotary atomizers with electrostatic direct or external charging technology can be used for all paint materials (1K, 2K).

EcoBell3 E — EcoBell3 E
The atomizer for external painting applies waterborne paints with highest levels of efficiency and minimal dirt to reach a perfect optical appearance.

EcoBell3 Ci — EcoBell3 Ci
The rotary atomizer is perfectly suited for interior waterborne paint application. Minimal color loss and the shortest cleaning times are its distinguishing features.

EcoBell4 — EcoBell4
Dürr’s latest atomizer generation can make a real contribution to improving the OEE of a paint shop.

EcoBell4 Pro — EcoBell4 Pro
EcoBell4 Pro with exchangeable electrode ring.

EcoBell4 Pro — EcoBell4 Pro
The EcoBell4 can perform color changes in just four seconds.

일반 산업용 응용 기술

EcoBell2 SL DC — EcoBell2 SL DC
The high-speed rotating atomizer EcoBell2 SL DC is suitable for the electrostatic application of all paint or for painting without high tension. It has been developed especially for high paint flow rates and high painting speeds.

2k material dosing and application by Dürr — Dosing Unit: EcoDose 2k
The EcoDose 2k is an electronic dosing system suitable for high and low pressure applications. It can be used in manual and automatic processes.

The EcoGun2 AS Auto is an automatic air spray gun designed for the automotive industry — EcoGun2 AS Auto
The EcoGun2 AS Auto is an automatic air spray gun designed for the automotive industry, especially for coatings that require reproductive spray patterns. It is suitable for water and solvent based media and can be installed on robots.

EcoGun 910 — EcoGun 910
The EcoGun 910 is a 2-piston state-of-the-art gravity-feed air spray gun. Designed for professional use, performance and durability are distinguishing characteristics in order to meet highest demands.

EcoPaintJet — EcoPaintJet
Overspray-free painting in the industry

EcoPump2 VP — EcoPump2 VP
Pneumatic vertical piston pump that scores with low maintenance times

RP10 R1100 painting robot is fully equipped with certified application technology — Ready2spray robot
Pre-installed and ready2spray: The EcoRP10 R1100 painting robot is fully equipped with certified application technology.

EcoPumpHP — Pumps: EcoPumpHP
The EcoPumpHP is an air-driven horizontal piston pump. It has been manufactured and tested according to Dürr's well-proven quality standards. Performance and durability are further distinguishing characteristics in order to meet highest demands.

EcoSupply2 Core — EcoSupply2 Core
Dürr’s EcoSupply2 Core is a modular paint supply station that integrates all the necessary components into a compact design.

Ready2integrate — Ready2integrate
Dürr offers fully equipped painting solutions for quick commissioning and easy installation in existing systems.

Final Assembly(의장)

Dürr overhead conveyor T.T.S. — Twin Trolley System®
Dürr overhead conveyor T.T.S. (Twin Trolley System®) with rotating carrier in the assembly shop

x-3Dsurface:The new, flexible sensor for chassis geometry measurement in the End-of-Line. — x-3Dsurface
The new, flexible sensor for chassis geometry measurement in the End-of-Line.

x-3Dsurface: testing wheel aligner truck — x-3Dsurface
The test stand for chassis geometry measurement with the new x-3Dsurface sensor for commercial vehicles.

Filling system — Filling system
Dürr has developed a highly efficient adapter for filling air conditioning systems. Not only does it operate at a much higher filling speed, but it also reduces the amount of refrigerant remaining in the adapter after the filling process by up to 80%. As a result a much smaller amount of hydrocarbon-bearing material needs to be used. This helps to cut material costs - and on top of this reduces emissions to the environment.

Overhead Conveyor – Vertical adjustable carrier (VAC) — Overhead Conveyor – Vertical adjustable carrier (VAC)
Height-adjustable load-bearing devices (VAC) can be used in combination with electric monorail systems or the Twin Trolley System (T.T.S.®).

ProFleet 4200 with lifting — ProFleet 4200 with lifting
Application for the automotive industry. The Automated guided vehicles (AGV) synchronized with the vertical adjustable carrier is about to transfer the car body.

Skillet platform systems with an integrated lifting device — Skillet platform systems
Skillet platforms with an integrated lifting device permit an optimal working level in terms of accessibility and ergonomics for every work section.

ProFleet 4200 with lifting: Automated guided vehicle (AGV) — [Translate to Korean:] ProFleet 4200 with lifting
[Translate to Korean:] Automated guided vehicle (AGV).

ProFleet 800: Automated guided vehicle (AGV) — ProFleet 800
Automated guided vehicle (AGV)

ProFleet 800: Fleet of automated guided vehicles (AGV). — ProFleet 800
Fleet of automated guided vehicles (AGV).

Overhead conveyor – Electric monorail system (EMS) — Overhead conveyor – Electric monorail system (EMS)
Electric monorail systems are available as standardized systems and as a special solution.

Somac® G4 Blue filling adapter — Somac® G4 Blue filling adapter
The filling adapter is the technological core of any filling station and has significant impact on the filling quality and process time, especially for vacuum-pressure filling.

Somac® ProLine Cube filling station — Somac® ProLine Cube filling station
The Somac® ProLine Cube is the new generation of filling equipment for vehicle systems on the assembly line.

x-light: The flexible and modular headlamp measuring and setting system in the End-of-Line. — x-light
The flexible and modular headlamp measuring and setting system in the End-of-Line.

x-road truck: The multi-function roll, brake, ABS test stand for commercial vehicles. — x-road truck
The multi-function roll, brake, ABS test stand for commercial vehicles.

x-road curve: The dynamic roll, brake, ABS test stand with steerable double rollers for testing autonomous and semi-autonomous vehicles. — x-road curve
The dynamic roll, brake, ABS test stand with steerable double rollers for testing autonomous and semi-autonomous vehicles.

[Translate to Korean:] Side window installation and gluing at VW Zwickau — Side window installation
Side window installation and gluing at VW Zwickau

[Translate to Korean:] Side window installation and gluing at VW Zwickau — Side window installation
Side window installation and gluing at VW Zwickau

Marriage process by electric vehicles — Marriage process by electric vehicles
Dürr is ideally equipped for the new marriage process for electric vehicles with its fully automatic bolting station x-bolt and the direct bolting system x-gun.

Rear axle adjustment station x-align — Rear axle adjustment station x-align
With x-align Dürr has a key component for the adjustment of the rear axle geometry (toe and camber) before the final assembly in the portfolio.

x-proof 360 — x-proof 360
The Vehicle-in-the-Loop setup for ADAS or autonomous driving function tests using over-the-air stimulation. For the first time, the unique concept enables fast, contactless, and reproducible ADAS/AD functional tests on complete, unmodified vehicles using a virtual traffic environment in a controlled and safe setting.

x-elect — x-elect
The automatic bolt picking and loading system x-elect for the fields of automation and final assembly. With the help of a 3D camera system and intelligent image processing software, the bolts are removed directly from the transport boxes and automatically brought to the defined transfer position for further processing in the bolting process.

x-3Dbalancer — x-3Dbalancer
The optical steering wheel balancer for precise and reliable measurement of the steering wheel position for automated test stands or automated vehicles. The measurement of the steering wheel angle during the chassis measurement and adjustment is carried out using a 3D camera and software specially developed for this application.

디지털화 및 소프트웨어

DXQ advanced analytics — DXQ advanced analytics
The AI application Advanced Analytics from the software product family DXQ identifies sources of defects and determines optimal maintenance schedules.

DXQ - Digital Intelligence by Dürr — DXQ - Digital Intelligence by Dürr
With Artificial Intelligence, systematic errors in the painting process can be detected, thus overall equipment effectiveness can be increased by allowing intervention at a very early stage.

DXQequipment.analytics — DXQequipment.analytics
The DXQ software products offer tailor-made solutions for the operation, analysis and control of the plants as well as the appropriate training courses.

DXQequipment.maintenance — DXQequipment.maintenance
The web-based maintenance software DXQequipment.maintenance monitors maintenance tasks for the entire paint shop based on e.g. pre-defined time periods, counters or algorithm results from the analysis software DXQequipment.analytics.

DXQquality.management web-based maintenance software — DXQquality.management
DXQquality.management connects process monitoring with vehicle information to generate a unique fingerprint for each vehicle within the factory

DXQ3D.onsite is a universal toolbox for Dürr EcoRP and EcoRS application robots to help operators with the configuration of process parameters as well as the programming of robot paths. — DXQ3D.onsite
DXQ3D.onsite is a universal toolbox for Dürr EcoRP and EcoRS application robots to help operators with the configuration of process parameters as well as the programming of robot paths.

DXQplant.analytics — DXQplant.analytics
The software uses artificial intelligence to systematically detect occurring quality defects and identify causes in the process.

Environmental Technology

[Translate to Korean:] Thermal processes at Duerr the Oxi.X ra RTO — Oxi.X RA RTO
Dürr Oxi.X RA RTO plant for efficient air pollution control

Oxi.X RTO plant — Oxi.X RTO plant
Regenerative thermal oxidizers use less primary energy compared to conventional air pollution control systems. This is achieved through the use of regenerative heat exchangers, which are highly efficient at using the energy contained in the hot exhaust gases to preheat the exhaust air to be treated.

Cyplan® ORC — Cyplan® ORC
ORC (Organic Rankine Cycle) is a steam turbine process, using waste heat for power generation.

Duerr Environmental Technology axhaust-air purification plant — Exhaust-air purification plant
Dürr offers a wide range of processes for air pollution control, and has the expertise for handling projects on an international scale. Product development is focused on designing air pollution control systems that save energy.

Oxi.X DF — Oxi.X DF
With this variant of the thermal exhaust air purification difficult, environmentally harmful components such as halogenated hydrocarbons, sulfur, NOx, etc. can be removed from the exhaust air.

Oxi.X RV — Oxi.X RV
Flameless regenerative thermal oxidation for carbon-neutral air pollution control

Oxi.X TR — Oxi.X TR
The Oxi.X TR recuperative thermal exhaust air purification process is the best-proven, safest and most universally applicable incineration method, by means of which organic contaminants are transformed mainly into water and carbon dioxide.

Oxi.X RA RTO revamp — Oxi.X RA RTO revamp
Dürr Oxi.X RA RTO plant for efficient air pollution control

Sorpt.X – VOC-Concentrator plant — Sorpt.X VOC Concentrator
Sorpt.X – VOC-Concentrator is a continuous adsorption process with downstream thermal or catalytic oxidation stage. With regard to the cost/benefit ratio, it is particularly advantageous for treating large volume flow rates combined with low pollutant burdens that would be uneconomical to treat directly.

Catalytic filter element — Catalytic filter element
The Catalytic filter element concept is a combined technology for dedusting, desulphurisation and denitrification through the use of Catalysed Candle Filter (CF) filter cartridges. These enable the simultaneous cleaning of dusts, heavy metals, sulfur oxides and nitrogen oxides in one system.

High-pressure catalytic systems frequently used for Air Pollution Control in the production of purified terephthalic acid (PTA). — High-pressure catalytic systems
High-pressure catalytic systems frequently used for Air Pollution Control in the production of purified terephthalic acid (PTA).

One of the worlds largest RTO installations with 2.31 Mio. Nm³/h treatment capacity — Oxi.X RE RTO
One of the world's largest RTO installations with 2.31 Mio. Nm³/h treatment capacity

[Translate to Korean:] Friedrich, Lars Dr. President & CEO Application Technology — Dr. Lars Friedrich
CEO Dürr Systems AG

Bruno Welsch, CEO Division Paint and Final Assembly Systems — Bruno Welsch
COO Dürr Systems AG & Deputy CEO

Jaroslaw Baginski, CFO of Dürr Systems AG — Jaroslaw Baginski
CFO Dürr Systems AG

Dr. Sebastian Baumann — Dr. Sebastian Baumann
CEO Division Clean Technology Systems

[Translate to Korean:] Bernd Preissler CEO Dürr Somac GmbH — Holger Füssel
CEO Dürr Somac GmbH

[Translate to Korean:] Durr Testing Contact Thomas Kolb CEO Dürr Assembly Production — Thomas Kolb
CEO Dürr Assembly Products

Andreas Hohmann — Andreas Hohmann
CEO Dürr Final Assembly

인간 그리고 기술

technology center for paint application systems in Bietigheim-Bissingen

Open training program — Open training programs – international training groups
As part of the open training program on application technology, Dürr experts from various countries provide shared instruction in small groups.

Open training programs – international training groups — Open training programs – international training groups
As part of the open training program on application technology, Dürr experts from various countries provide shared instruction in small groups.

Employee working on filling system

Painting robot from the inside — Made in Germany for the whole world
All of Dürr's painting robots are assembled and programmed at the Bietigheim-Bissingen competence center. They then start their journey to automotive plants around the world.

Employee checking the paint finish of a car

동영상 & 더 많은 자료

당사 유튜브 채널에서 제품 및 기타 사항에 대한 더 다양한 동영상 자료를 찾아볼 수 있습니다.
도움이 필요하실 경우 알려주시기 바랍니다.

DÜRR 유튜브 채널

Media Contact

Contact

Dürr Marketing

Marketing

info@durr.com

Dürr Systems AG
Carl-Benz-Str. 34
74321 Bietigheim-Bissingen
독일