Press photos and movies of Dürr
Terms of use relating to images and movies of Dürr
All images are protected by copyright. Dürr is the holder of all rights of use, without exception.
The images may not be modified and may be used exclusively for purposes of editorial reporting but not for commercial purposes such as advertising/marketing and trade. The reference “Image source: Dürr” must be added to any publication.
If you have questions about the use of the pictures, please contact us. If images are desired to be used for purposes other than reporting or if modifications to our images are desired, permission must be obtained in advance.
Downloads
The Ecopure® CCF concept is a combined technology for dedusting, desulphurisation and denitrification through the use of Catalysed Candle Filter (CCF) filter cartridges. These enable the simultaneous cleaning of dusts, heavy metals, sulfur oxides and nitrogen oxides in one system.
Die Ecopure® KPR concentrator is a continuous adsorption process with downstream thermal or catalytic oxidation stage. With regard to the cost/benefit ratio, it is particularly advantageous for treating large volume flow rates combined with low pollutant burdens that would be uneconomical to treat directly.
Regenerative thermal oxidizers use less primary energy compared to conventional air pollution control systems. This is achieved through the use of regenerative heat exchangers, which are highly efficient at using the energy contained in the hot exhaust gases to preheat the exhaust air to be treated.
The Ecopure® TAR recuperative thermal exhaust air purification process is the best-proven, safest and most universally applicable incineration method, by means of which organic contaminants are transformed mainly into water and carbon dioxide.
Dürr has developed a highly efficient adapter for filling air conditioning systems. Not only does it operate at a much higher filling speed, but it also reduces the amount of refrigerant remaining in the adapter after the filling process by up to 80%. As a result a much smaller amount of hydrocarbon-bearing material needs to be used. This helps to cut material costs - and on top of this reduces emissions to the environment.
With its wheel alignment stand, x-wheel truck d, Dürr Assembly Products has set new standards in the measurement and alignment of the wheel geometry for trucks and buses with axle loads of up to 10 tons. Well-known manufacturers such as Volvo, DAF, Paccar, Renault and Mercedes-Benz benefit from the great advantages of this test stand in terms of quality, flexibility and cycle times. Based on the principle of non-contact x-3Dprofile measuring technology, which is unique in the world, it covers the high variance with regard to number and position of the axles in an automated process and dispenses with the need for adaptive measuring devices on tires and frames.
Wheel alignment measurement and adjustment with maximum precision – the Dürr Assembly Products x-wheel alignment stand makes it possible. The two non-contact x-contour measuring systems and the innovative three-dimensional x-3Dprofile measuring system offer measuring technology with maximum accuracy and repeatability. Together with the x-tronic balancer for steering wheels, they ensure precise wheel alignment with horizontal steering wheel position when driving straight ahead.
Footage
You are interested in any footage?
Please have a closer look on our YouTube channel and let us know, how we can support you.
DÜRR YOUTUBE CHANNEL
Media Contact
Anja Wonner
Marketing
- Phone +49 7142 78-2772
- Email anja.wonner@durr.com
Dürr Systems AG
Carl-Benz-Str. 34
74321 Bietigheim-Bissingen
Germany
Carl-Benz-Str. 34
74321 Bietigheim-Bissingen
Germany