EcoPaintJet Pro – Efficient and sustainable two-tone painting
The EcoPaintJet Pro is an innovative system for automated, overspray-free paint application. A perfectly coordinated combination of robot, measuring system, and applicator ensures highly defined coating. The process saves time and is environmentally friendly, removing the need for manual and time-consuming masking.
The EcoPaintJet can be integrated into the painting line of new plants or can be fitted to existing plants as an additional module. The system is installed onto a robot and applies the decorative paint directly onto the chosen surface
Operating principle
The underside of the applicator is equipped with a nozzle plate that has around 50 almost invisible holes, each approx. one tenth of a millimeter in diameter. The paint is applied through these holes in parallel lines from 30 mm. Every hole in the nozzle plate can be opened and closed individually. This makes it possible for the EcoPaintJet Pro to apply paint very precisely and with absolutely no overspray.
The measuring system uses sensors to measure the chosen surface and sends the data to the control software. The software then constantly calculates exactly how the applicator should travel over the surface and how much paint has to be dispensed.
This advanced technology allows vertical surfaces, roof arches and door panels to be coated in contrasting colors and, in particular, enables patterns to be applied where otherwise a wrap would have to be used.
The benefits of EcoPaintJet Pro:
- Highly precise and sharply defined coating
- Body masking no longer necessary
- Time required fort wo-tone pain application significantly reduced
- Automated manufacture of customer-specific requirements



