Фото для прессы и видео концерна Dürr

Условия использования фото для прессы и видео концерна Dürr

Все изображения защищены авторским правом. Владельцем всех прав пользования является Dürr AG.

Изображения разрешается использовать без каких-либо изменений исключительно для целей редакционного освещения событий, однако не для коммерческих целей, например, рекламы, маркетинга и торговли. К публикации должно быть добавлено указание «Источник фотографии: Dürr».

В случае использования наших изображений мы просим кратко сообщить о данном факте по этому адресу. Если предполагается использование для целей, отличающихся от освещения событий в прессе, или планируется изменение наших изображений, перед этим следует получить наше разрешение.

Загрузки

Продукты и решения

**7 Axes – Total freedom of movement**
Thanks to its seven axis kinematic system, the EcoRP E043i robot reaches every spot in the car body. This can eliminate the need for a linear displacement rail and significantly reduce investment and maintenance costs in the paint booth.

**The new generation of 7-axis robots EcoRP E043i**

**EcoBell2 SL DC**
The high-speed rotating atomizer EcoBell2 SL DC is suitable for the electrostatic application of all paint or for painting without high tension. It has been developed especially for high paint flow rates and high painting speeds.

**Dosing Unit: EcoDose 2k**
The EcoDose 2k is an electronic dosing system suitable for high and low pressure applications. It can be used in manual and automatic processes.

**EcoGun air atomizer**
The industrial product portfolio includes the EcoGun air atomizer.

**EcoGun2 AS Auto**
The EcoGun2 AS Auto is an automatic air spray gun designed for the automotive industry, especially for coatings that require reproductive spray patterns. It is suitable for water and solvent based media and can be installed on robots.

**Ecopure® HPX**
Catalytic air purification Ecopure® HPX

**Cyplan® ORC**
ORC (Organic Rankine Cycle) is a steam turbine process, using waste heat for power generation.

**Ecopure® CCF – Catalytic Candle Filter**
The Ecopure® CCF concept is a combined technology for dedusting, desulphurisation and denitrification through the use of Catalysed Candle Filter (CCF) filter cartridges. These enable the simultaneous cleaning of dusts, heavy metals, sulfur oxides and nitrogen oxides in one system.

**Ecopure® CRC – VOC-Concentrator**
The Ecopure® CRC concentrator is a continuous adsorption process with downstream thermal or catalytic oxidation stage. With regard to the cost/benefit ratio, it is particularly advantageous for treating large volume flow rates combined with low pollutant burdens that would be uneconomical to treat directly.

**Ecopure® RTO – Regenerative Thermische Oxidation**
Regenerative thermal oxidizers use less primary energy compared to conventional air pollution control systems. This is achieved through the use of regenerative heat exchangers, which are highly efficient at using the energy contained in the hot exhaust gases to preheat the exhaust air to be treated.

**Ecopure® SCR – Selective Catalytic Reduction**
The Ecopure® SCR serves to reduce nitrious oxides (NOx) from flue gases or process gases if high nitrous oxide conversion rates are required.

**Ecopure® VAR – Incineration of Exhaust Gases and residual liquids**
With this variant of the thermal exhaust air purification difficult, environmentally harmful components such as halogenated hydrocarbons, sulfur, NOx, etc. can be removed from the exhaust air.

**Ecopure® TAR – Recuperative Thermal Oxidation**
The Ecopure® TAR recuperative thermal exhaust air purification process is the best-proven, safest and most universally applicable incineration method, by means of which organic contaminants are transformed mainly into water and carbon dioxide.

**Exhaust-air purification plant**
Dürr offers a wide range of processes for air pollution control, and has the expertise for handling projects on an international scale. Product development is focused on designing air pollution control systems that save energy.

**Eco+Paintshop**
Dürr is the world leader in the planning and implementation of paint shops for the automotive industry.

Dürr's electrodialysis in dip coating — **EcoDC MACS**
EcoDC MACS creates a voltage profile that moves with the car body.

**EcoDry X**
EcoDry X – the intentionally simple and robust paint overspray separation

**EcoDryScrubber**
The EcoDryScrubber is a new generation of overspray separation requiring no water and no water treatment.

**Ecopaint WetSystem**
[Translate to Russian:] Ecopaint WetSystem successfully unites all components and modules for a perfect corrosion protection of the car body. For many years the rotational dip-coating system RoDip® has stand for the perfect interplay between plant and conveyor.

**EcoReBooth**
EcoReBooth – compact and modular

Dürr's EcoReflect is a innovative light tunnel for checking surface quality — **EcoReflect**
Innovative light tunnel for checking surface quality.

**EcoSmart VEC**
EcoSmart VEC – a fresh and exhaust air control system to provide “energy on demand”.

**FAStplant**
Dürr's FAStplant offers the first modular plant concept for the final assembly of automobiles. The main line of final assembly can be installed or retrofitted within a few days with FAStplant.

**DXQcontrol**
DXQcontrol is a Manufacturing Execution System (MES) for the economic management and optimization of production processes. The modular software is compatible with any commercially available Programmable Logic Controller (PLC) worldwide.

EcoInCure by Dürr stands for innovative car body curing from the inside — **EcoInCure**
EcoInCure stands for a new generation of car body curing: The heating and cooling of the car body take place primarily from the inside.

**RoDip®**
Rotational dip process RoDip® represents perfect harmonization between plant and conveyor equipment. Rotation of the body optimizes the whole process of immersion, flooding and draining.

**Final Assembly**
Dürr offers worldwide turnkey solutions for new plants and modifications for automotive final assembly.

**Overhead Conveyors**
Dürr's conveyor system concepts ensure an exact cycle time for body and material flow in the mass production of automobiles.

**Automated Guided Vehicles (AGV)**
Dürr supplies complete AGV systems with the corresponding supervisory controls or, alternatively, acts as an integrator of external systems.

**Skid Conveyor**
Dürr is a competent partner for delivering everything from various roller bed designs, turntables, cross transfer cars and cross-chain conveyors to elevators.

**Skillet conveyor**
Dürr conveyor systems transport bodies through the various process stations in the body-in-white, paint and final assembly shops.

**Slat conveyor**
Slat conveyor from Landrover in the British Solihull plant.

**Filling system**
Dürr has developed a highly efficient adapter for filling air conditioning systems. Not only does it operate at a much higher filling speed, but it also reduces the amount of refrigerant remaining in the adapter after the filling process by up to 80%. As a result a much smaller amount of hydrocarbon-bearing material needs to be used. This helps to cut material costs - and on top of this reduces emissions to the environment.

**x-DASalign**
x-DASalign secures that lights and driver assistance systems are set exactly.

**Wheel alignment stand: x-wheel truck d**
With its wheel alignment stand, x-wheel truck d, Dürr Assembly Products has set new standards in the measurement and alignment of the wheel geometry for trucks and buses with axle loads of up to 10 tons. Well-known manufacturers such as Volvo, DAF, Paccar, Renault and Mercedes-Benz benefit from the great advantages of this test stand in terms of quality, flexibility and cycle times. Based on the principle of non-contact x-3Dprofile measuring technology, which is unique in the world, it covers the high variance with regard to number and position of the axles in an automated process and dispenses with the need for adaptive measuring devices on tires and frames.

**Wheel alignment stand: x-wheel**
Wheel alignment measurement and adjustment with maximum precision – the Dürr Assembly Products x-wheel alignment stand makes it possible. The two non-contact x-contour measuring systems and the innovative three-dimensional x-3Dprofile measuring system offer measuring technology with maximum accuracy and repeatability. Together with the x-tronic balancer for steering wheels, they ensure precise wheel alignment with horizontal steering wheel position when driving straight ahead.

**EcoGun 910**
The EcoGun 910 is a 2-piston state-of-the-art gravity-feed air spray gun. Designed for professional use, performance and durability are distinguishing characteristics in order to meet highest demands.

**Pumps: EcoPump AD**
A wide choice of manufacturing materials for the pump housing makes the EcoPump AD the best solution for different kinds of fluid handling such as abrasive and particle containing fluids.

**EcoRS 30L16S**
Thanks to its shortened arm 1, the robot EcoRS 30L16S is particularly suitable for sealing applications inside car bodies.

**EcoShot Meter Double**
The electric EcoShot Meter piston dosing unit is suitable for most viscous sealing and gluing materials. The precise system is available in two sizes and covers almost all applications as a standard model.

**EcoBell2 ICC**
The new EcoBell ICC paint atomizer speeds up the change from one color to the next and reduces the material lost in the process to a minimum. Color changing time is reduced to about 6 seconds, paint loss drops to a maximum of one tenth of the previous amount.

**Color changer EcoLCC2**
The color changer EcoLCC2 provides up to 36 colors flexibly for painting. Each color is activated by docking into the respective paint valve. The color change is done quickly, and paint losses remain minimal with just 10-15 ml per color change.

**Pumps: EcoPumpHP**
The EcoPumpHP is an air-driven horizontal piston pump. It has been manufactured and tested according to Dürr's well-proven quality standards. Performance and durability are further distinguishing characteristics in order to meet highest demands.

**Gluing in body in white: flatstream application**
Flatstream application is used for insulation in the automotive sector. The nozzle is adjustable in width to suit the respective application task.

**Gluing in final assembly: window glazing**
Dürr expands its business in the field of gluing equipment for automobile manufacture. The acquisition of the specialist firm Kleinmichel in January 2010 enables Dürr to offer solutions for all gluing processes in vehicle production.

digital@DÜRR

**ADAMOS Hackathon at Dürr**
Programming contest involving over 60 participants

**MES Software**
An efficient manufacturing execution system (MES) is a key technology for digital smart factories. Our DXQcontrol links the individual items of equipment and enables big data analysis, allowing factory operators to enhance production efficiency.

**3D Laserscan**
At the powerwall, computer simulation can be used to take a virtual tour of a paint shop even before it is built: fly-through animation enables users to compare building plans with the planned painting line in advance, and identify any spatial conflict.

**digital@DÜRR**
Our digital services help our customers in their work, day after day. Together with our strong partners, we promote digital solutions for the mechanical engineering industry.

**DXQpad tablet PC**
Customer services are also becoming digital: the QR codes at Dürr's machines and systems can be scanned using the DXQpad tablet PC. It provides the customer with operating instructions, information on potential sources of error, or the serial number.

Управление

**Dr. Jochen Weyrauch**
CEO of Dürr Systems AG

**Bruno Welsch**
CEO Division Paint and Final Assembly Systems

**Dr. Lars Friedrich**
CEO Division Application Technology

**Dr. Daniel Schmitt**
CEO Division Clean Technology Systems

**Roland Spieß**
CEO Dürr Assembly Products GmbH

Логотипы

Durr-Logo CMYK

Durr-Logo RGB

Люди и технологии

**Bietigheim-Bissingen technology center**
In Bietigheim-Bissingen, Dürr operates the world's largest technology center for paint application systems in the automotive industry. This is where new products are developed and painting processes are tested prior to large-scale use.

**Open training programs – international training groups**
As part of the open training program on application technology, Dürr experts from various countries provide shared instruction in small groups.

**Filling systems**
Dürr Somac filling systems are used to fill cars with the necessary operating media such as transmission oil, air-conditioning refrigerant and brake fluid. Dürr Somac, based in Stollberg (Saxony), is the world market leader in this field.

**Made in Germany for the whole world**
All of Dürr's painting robots are assembled and programmed at the Bietigheim-Bissingen competence center. They then start their journey to automotive plants around the world.

**Perfect finish**
The paint finish of a car is one of its particular features. Dürr's application technology ensures a perfect finish as well as maximum resistance.

Видео и многое другое

На нашем канале в YouTube вы найдете множество видео о нашей продукции и многом другом.
Узнайте о том, как мы можем помочь вам в этом и других аспектах.

YOUTUBE-КАНАЛ DÜRR

Контакт для прессы

Anja Wonner

Marketing

Email info@durr.com

Dürr Systems AG
Carl-Benz-Str. 34
74321 Bietigheim-Bissingen
Germany